Showing posts with label leather products. Show all posts
Showing posts with label leather products. Show all posts

Thursday, March 22, 2018

Leather Easy Projects

Yiguan synthetic leather wholesale

Easy Projects

Making flat pieces such as lamellae or scales is easy. Because it is hard to predict the exact amount of shrinkage, you may want to first to water harden the whole piece of leather, then flatten it under a cutting board or something similar for a few minutes, then cut out your lamellae with a utility knife and add holes with a  glitter leather punch; at this stage in the process the leather can still be cut fairly easily.
If I want my lamellae slightly curved in the horizontal direction, to provide a little additional stiffness and to better fit my body, I take a cooking pot with a diameter of a foot or more, line up the lamellae around it while they are still flexible, tie them on with a strip of rag, and let them dry that way.

Making a vambrace, a rerebrace, or any other piece that is curved but not stretched--any shape you could make from a sheet of paper--is equally easy. Cut the piece of leather a little bigger than you think you need (remembering to allow for shrinkage), harden it. Wrap a towel around your forearm to protect it from heat and provide extra thickness to allow for padding (or wear your gambeson, if it covers your arm). Tie the piece of leather around your arm with strips of cloth (string will leave marks on the leather). Leave it there for fifteen minutes or so. Untie it and take it off, being careful to keep the shape--at this point the leather is still fairly flexible. Trim off any surplus. Leave it somewhere to dry. Instant vambrace.


Further Details

For SCA fighting, you should probably start with at least 8 ounce leather, which the hardening process will thicken to about 10 ounce. 12-14 ounce is better--but harder to stretch over forms. In general, you will want thicker leather over vulnerable points such as knees and elbows--which means either starting with thicker leather or leaving your leather in the hot water longer to get more shrinkage.
Sometimes something will go wrong; you pull the piece of leather intended for a bazuband out of the water only to discover that it has shrunk too much to fit your form, or that a thin section you didn't notice has shriveled up, ruining the piece. All is not lost. Flatten the piece out and cut it into lamellae. Enough mistakes and you have a free klibanian.

One minor problem with the process is that the leather gradually turns the water you are using brown. For a simple project, such as making lamellae, this may be tolerable; you can stir the piece of leather to the top of the pot every ten seconds or so to check its condition. For something more complicated, such as a bazuband or greaves, you may want to heat fresh water for each piece--which is a nuisance but makes it easier to see what you are doing.


Harder Projects

One advantage of water hardening is that when the piece comes out of the water it is stretchy--more so than leather that has been soaked for a much longer time in cold water, as described in my earlier article. This makes it possible to form pieces. You must work quickly, since the stretchiness goes away in a minute or two.
Elbow cops are easy. Start with a roughly oval shape, about 10" by 7.5", as shown in the figure. Find two bowls, diameter about 6.5", that will nest together. When the piece comes out of the hot water, put it into one of the bowls, forcing it down with your fingers to stretch the leather into the bowl, then put in the other bowl, so that the leather is being stretched between the two.
Finally, take out the inside bowl and make sure that the leather is fitting into the other with no folds, crinkles, etc.--if necessary smooth those out with your fingers. Let the leather dry. Sew or rivet on straps and you have an elbow cop. For a knee cop, do the same thing, making the piece about 14" x 7.5" and using about 7.5" diameter bowls. Details will vary according to the size of your elbow and knee and how thick your padding is going to be.
A bazuband--the Islamic forearm and elbow piece described in the previous article and shown here--is a more complicated shape. There are four ways to try to make it.
 1. Use your arm, wrapped in a towel, as the mold. This will probably work better with two people, giving you three hands to stretch leather. I have not yet tried doing the initial stretching that way, although I usually put the piece over my arm for the final adjustments.
 2. A positive form. Get something roughly the shape of the inside of the bazuband. A steel bazuband is ideal if you happen to have one lying around, but lots of other things will do. For a less precisely designed form, but one somewhat easier to obtain, use a wine bottle with relatively steep shoulders.
With a positive form, you take the leather out of the hot water and stretch it over the form. I find that it helps to tie the wrist end of the leather around the form with strips of cloth, then do the stretching at the elbow end, which is where it is most needed. then tie that down to the form with strips of cloth. This is like making an elbow cop with only one bowl, by stretching the leather over the bowl--but harder. You may find it useful to do some preliminary stretching over a rounded corner of the kitchen table, or something similar.
 3. A negative form. Get something that is roughly the shape of the outside of the bazuband and stretch the leather into it--like forming your elbow cop in the inside of a bowl.
4. Nested forms. This is the best way--once you have the forms. I've done it using a pair of steel bazubands. They don't have to be steel--once you have made a cuirboulli bazuband you are happy with, you can use it as your negative form for the next one, nested onto whatever form you used to make it.


Alternatively, you could make both positive and negative forms out of wood--by the next version of this article, I may have finished that project, using lengths of 2x4 sandwiched together and pegged. In theory, you end up with forms that can be made narrower, for thin people's arms, by removing the central piece, or wider, for big people's legs, by adding another piece.


Wednesday, January 17, 2018

How to Paint Faux LeatherⅢ

1 Trace a design onto the surface. Use a pencil to lightly trace your desired design onto the leather. Do not press too hard, as this will indent the leather. The paint is also semi-transparent, so any bold lines beneath the paint may show through.
2 Fill in the design. Using a paintbrush, fill in your design with the desired colors.Try to avoid creating thick layers of paint. A thick layer of paint will be more likely to crack over time. If your design has multiple colors, let each color dry before moving on to the next to avoid smudging the paint.Be sure to clean your brushes each time you select a new paint color to work with. Keep a small cup of water next to your workstation. Dip the paintbrush in the water before placing it into another color.
3 Clean up mistakes with acetone. If you make a mistake while painting, use a small amount of acetone on a cotton ball or cotton swab to gently lift away the paint. Once the paint is successfully removed and the area has dried, you can continue painting.

4 Let it dry. When you have finished painting your design, put it aside and let it air dry. The item should be secured in a safe place where it won’t be damaged or disturbed. The paint should dry within 15 to 20 minutes.

Monday, January 8, 2018

How to Paint Faux LeatherⅡ


By heartsun leather,a china leather factory
1 Clean the faux leather. Use a small amount of isopropyl alcohol to remove dust, dirt, grease, and wax from the faux leather. Dampen a cotton ball and wipe the entire surface of the material. A clean surface, free from dirt and grease, will allow the paint to strongly adhere to the faux leather.
2Use a paint palette. Prepare a paint palette so you can easily and efficiently access your desired paint colors as you work. You can buy a wooden or plastic artist’s palette at an arts and crafts store, or you can use a sheet of aluminum foil, a newspaper, or a magazine to house your paint.
3 Mix a small amount of acetone to your acrylic paint. Squeeze your desired paint colors onto your paint palette and add a few drops of acetone to the paint if you are working with acrylics. The acetone will thin the paint, making it smooth and easier to work with. Gently mix the paint and the acetone together with a small paintbrush. Be sure to only add a few drops or up to a teaspoon of acetone to your paint so that the paint does not become too watery.
4 Apply a base coat for large surfaces. If you are painting a large surface in a uniform color, you will want to apply an even base coat of paint to the surface. Use the paint you selected for your project and apply it to the surface. This is ideal if you are working with furniture or clothing.
5 Apply paint to one side of a sponge. Lightly press the sponge into the paint from your paint palette. Use long, vertical strokes to distribute the paint across the faux leather surface. Acrylic paint can dry rapidly, so you will need to work quickly if you are working with this medium. Focus on creating long strokes when painting a large surface to avoid creating streaks. If you are working on upholstery, plan to paint only one side at a time.
6 Allow the paint to dry. Before adding additional coats, the paint will need to dry completely. Place the item in a safe place where it won’t be disturbed, damaged, or moved. Wait for about 15 to 20 minutes for the coat to dry completely.


7 Enhance the color with additional layers of paint. After the first coat of paint has thoroughly dried, add another layer of paint to enhance the brightness and saturation of the color. As you add additional layers, be sure that the previous coat is dry before you apply another coating of paint.

Tuesday, September 6, 2016

How to Remove the Smell of Leather(1)

how to remove the smell of leather, leather wallets, car leather chairs, leather clothing, has its own methods.

If Leather wallets have strong leather smell, you can put leather wallets into the refrigerator fresh day, you can also spray some perfume or champignon or put some tea, so can removed the smell.

Remove the automotive leather smell, the most effective is to put the car activated carbon, activated carbon has a strong adsorption effect, can quickly and effectively absorb the car leather smell. But do not the car perfume, otherwise the taste will be more unpleasant, but also to do under the sun exposure, otherwise the flavor will be even greater.

Remove leather garment odor, there are many ways, such as clean leather garment with alcohol and water; it is better to select special cleaning agent to remove leather with strong odor.


pu leather


PCE has some of the odor removal effect, both leather cleaning dirt, but also to remove the smell of leather, and high efficiency.

The leather hung just showered and there is some steam bath within two to three hours, when the smell of leather in the evaporation of water will also evaporate, you can remove the odor when out to dry.

pu leather

The leather hang in a dry, well-ventilated shade to blow odor. When hanging leather, you can spray a little vinegar on clothes, vinegar after air drying, there is no taste, the smell of leather and will reduce or even disappear.
When placed in leather or wearing leather, you can spray some of the perfume in leather garment, this will not lead to strong scent mixed with the smell of leather, leather will not cause odor distribution.

The 2-3 grapefruit skin wrapped in leather among place a week or so, you can remove the odor, but also smell the fragrance of grapefruit. You can place some grapefruit skin or some activated charcoal on cupboard to absorb odors.


to be continued